Any 6.0 SBE builds out there???

[toobroke2race]

I'm fairly new to the LS engines always been a SBF guy,been doing research for almost a year.I picked up a LQ4,all looks good,gonna clean the block and crank and put rings and bearings and ARP hardware where ever it's needed.I got a set of GM LS3 heads 88958758 Vic Jr intake and gonna run a hydraulic roller.Gonna run a carb with a distributor in the front with probably a MSD Grid and up to 250-300 shot with a glide in a 2900lb race weight,track only mustang with 28's or 275's.I know the compression is gonna be low but I plan on building a 408 later so I'm gonna run what I got and want to get the most out of it I can.

Anybody running a similar combo and any advice or input would be appreciated!

Thanks

[ls13ater]

I bought a motor off (topend) matt, lq4 sbe flycut piston, ls3, pat g cam, t56, made 465/432 in his car and went a best of 6.8x@104 on the motor, went 7.10@99 in my car and 6.60@109 on 125 shot with a 1.5560ft weight 3050 with me in it, I have a ls2 block with Callie's/Wiseco, little more compression same top end but converting it to carb with a plate(200)going in my s10 this week it weight 2960 I will post the results soon

[adamsgto2004]

I wish i had back to back comparison of the ls3 top end and mine.......