Finally something to talk about... - Page 2

SVTParatrooper · 01-24-2007, 04:06 PM

Quote:

Originally Posted by Markcore

I sure damn hope so!! ...and it was a wheelie car LOL

should look alittle like this, maybe a tad bit higher!

DAANNNG! Thats gonna be SWEET! Your gonna have wheelie bars even.

Markcore · 01-31-2007, 08:50 PM

Dropping the car off tomorrow to get the gears put in!!!

1234 · 01-31-2007, 09:04 PM

should have went 4.10's

get an offroad Hpipe too.. and keep the factory mufflers
I had an 06GT.. Trust me

Markcore · 02-01-2007, 10:24 AM

how are 4.10's as a daily driver??

1234 · 02-01-2007, 10:26 AM

Lovely...

with the 4.6 turning higher rpms I had SCT tuned.. and a 6800 Rev limit

Getthe 4.10's man.. or the 3.90 FMS gears

Markcore · 02-02-2007, 11:43 AM

Quote:

Originally Posted by 06SIXLITER

Lovely...

with the 4.6 turning higher rpms I had SCT tuned.. and a 6800 Rev limit

You have your rev limit at 6800?? isnt red line 6000?

...the 3.73's are already in.

Markcore · 02-05-2007, 11:06 AM

Went to the track on Sunday. Weather was nice, but very windy. Had to drive straight into the wind.

Stock I ran a 14.2 @ 99mph

Sunday I ran a 13.3329 @ 104.85mph 1.99 60'

SVTParatrooper · 02-05-2007, 06:30 PM

Quote:

Originally Posted by Markcore

Sunday I ran a 13.3329 @ 104.85mph 1.99 60'

DAANNNG! I best get on the ball and get my piece fixed soon!!

Alansvt · 02-06-2007, 03:50 PM

Quote:

Originally Posted by SVTParatrooper

DAANNNG! I best get on the ball and get my piece fixed soon!!

lol yeah better hurry. Ill be installing a KB in NOV 2007 ^^

SVTParatrooper · 02-07-2007, 11:57 AM

Quote:

Originally Posted by 01redsvt

lol yeah better hurry. Ill be installing a KB in NOV 2007 ^^

Damn Alan, you've done passed me up awhile ago. I couldn't stand to see Mark's 'Stang pulling away from me though. I'm just so used to seeing it in my rearview........LOL

Markcore · 02-07-2007, 01:19 PM

Quote:

Originally Posted by SVTParatrooper

I couldn't stand to see Mark's 'Stang pulling away from me though. I'm just so used to seeing it in my rearview........LOL

OH YOU SON OF A BITCH!!

I'll let you know what the 12's feel like in March!

SVTParatrooper · 02-07-2007, 01:41 PM

Quote:

Originally Posted by Markcore

OH YOU SON OF A BITCH!!

I'll let you know what the 12's feel like in March!

and then by June I'll let you know how 14 pounds of boost feels and if you come down this summer I'll remind you what Lightning tailights look like.......don't worry I'll stop so you can get your headlights back after I suck them out, they'll be sittin' in the bed.

Alansvt · 02-07-2007, 03:43 PM

lol 14 pounds? I think im pusing about that or maybe even 15.
6lb pully and ported blower.

SVTParatrooper · 02-08-2007, 12:17 PM

Quote:

Originally Posted by 01redsvt

lol 14 pounds? I think im pusing about that or maybe even 15.
6lb pully and ported blower.

I'm only pushing 12 with a 4 pound pulley. Probably going to move up to a 6 pound once I get everything straight. So just leave me alone Alan and stop fucking with me. This is between me and Mark!..........LOL

Markcore · 02-08-2007, 12:44 PM

14lbs of boost.... dude I'll hit 12's on ZEROlbs of boost!!!! lol! I met this dude on the Buckeyestangs site. He said when the track opens in Ohio I can run his drag radials a few times. Some pretty cool dudes over there. I'll tell you what... when i come down to VA this summer we can use your truck to haul my car to the track. How about that? Hell buddy I'll even let you run it a few times. No sense in just one of us getting to go fast all day.

SVTParatrooper · 02-08-2007, 12:58 PM

Quote:

Originally Posted by Markcore

when i come down to VA this summer we can use your truck to haul my car to the track.

Hell, I'll tell ya what. I'll haul your car to the track, cut your head off out the hole, be waiting for ya back at the pits, and then haul your car back home...................and maybe, just maybe, if I'm feelin' nice I'll show you how to cut a good time in your car before I put it back on the trailer.

Markcore · 02-08-2007, 02:24 PM

You just stick to the quads and leave the Drag racing up to me buddy!

Ronnie · 02-08-2007, 03:06 PM

Quote:

Originally Posted by Markcore

.... dude I'll hit 12's on ZEROlbs of boost!!!! lol! .

I hope so with a car that weighs a thousand pounds less than a L and has 1 extra valve per cylinder.

SVTParatrooper · 02-08-2007, 06:18 PM

Quote:

Originally Posted by Ronnie

I hope so with a car that weighs a thousand pounds less than a L and has 1 extra valve per cylinder.

^^^^^Ooohhhh shit Mark you've done stepped in a bee's nest!!! Gots tha Lightning Mafia on your ass now son, you mess with one of us you mess with us all......LOL

Quote:

Originally Posted by Markcore

You just stick to the quads

..................You need me to show you how to ride a 4-wheeler too?!.......Well, I guess but if you hurt yourself then thats on you. Deal?

Markcore · 02-17-2007, 12:35 AM

Dude I'm thinking about buying a yamaha chromed out 1100!!! I dont think they sell them at the shop here. Might be able to find one on Ebay or somethin'. THEN, we'll see whats up!!! Vrooooooooooooooooooom

SVTParatrooper · 02-19-2007, 02:16 PM

Quote:

Originally Posted by Markcore

Dude I'm thinking about buying a yamaha chromed out 1100!!! I dont think they sell them at the shop here. Might be able to find one on Ebay or somethin'. THEN, we'll see whats up!!! Vrooooooooooooooooooom

.........I think Lil Wayne has one. If he doesn't then his Daddy does. See if you can get one from them Yo.

ExtraDuty77 · 03-04-2007, 07:09 PM

Well sold the Busa and soon as the check clears, iam hoping to get it to fastlane before i deploy on the 14th of march. Need to get a foundation built for the 2.6 kenne bell. to bad i won't see it untill nov.

ExtraDuty77 · 03-08-2007, 12:54 PM

Well iam sad to say iam not going to be able to get my car to Fastlane. Iam going with someone closer to the house so the wife can deal with it while iam deployed.

4.6L 3-Valve Stroker Rotating Assembly

Features:
Custom Livernois Forged Steel Stroker Crankshaft
Livernois Exclusive MAHLE 3-Valve Forged Pistons
MAHLE Rings, Locks, and Wrist Pins
Livernois Exclusive Manley H-Beam Rods
Federal Mogul Race Bearings

* All Rotating Assemblies are Balanced and include MAHLE Pistons and Manley H-Beam Rods engineered EXCLUSIVELY for Livernois Motorsports

These are the part I have so far along with a center force DF Clutch and Alum flywheeland shorty headers. can't wait until nov so i can see it.

Alansvt · 03-08-2007, 06:35 PM

lol I hope you know what your doing ^^ LOL

Markcore · 03-09-2007, 10:46 PM

Hey man do you still have those SLP Loud Mouth Mufflers??

01-31-2007, 09:04 PM	#28
1234 Join Date: Jan 2007 Location: Broadway NC Posts: 1,559	should have went 4.10's get an offroad Hpipe too.. and keep the factory mufflers I had an 06GT.. Trust me __________________ I wanna go fast!

02-01-2007, 10:24 AM	#29
Markcore What yo name is??!! Join Date: Aug 2006 Location: Dallas, TX Posts: 2,223	how are 4.10's as a daily driver?? __________________ 2007 F250 CCSB - 2007 F250 PowerStroke 20 degree cold start walk around *HD - YouTube

02-01-2007, 10:26 AM	#30
1234 Join Date: Jan 2007 Location: Broadway NC Posts: 1,559	Lovely... with the 4.6 turning higher rpms I had SCT tuned.. and a 6800 Rev limit Getthe 4.10's man.. or the 3.90 FMS gears __________________ I wanna go fast!

02-05-2007, 11:06 AM	#32
Markcore What yo name is??!! Join Date: Aug 2006 Location: Dallas, TX Posts: 2,223	Went to the track on Sunday. Weather was nice, but very windy. Had to drive straight into the wind. Stock I ran a 14.2 @ 99mph Sunday I ran a 13.3329 @ 104.85mph 1.99 60' __________________ 2007 F250 CCSB - 2007 F250 PowerStroke 20 degree cold start walk around *HD - YouTube

02-07-2007, 03:43 PM	#38
Alansvt Registered User Join Date: Jul 2006 Location: Sanford/Fayetteville/Ft. Bragg Posts: 1,976	lol 14 pounds? I think im pusing about that or maybe even 15. 6lb pully and ported blower. __________________ 2002 F150 Screw DD 2001 Lightning Sold 2010 TT Gt500 Sold Next project 67-68 Fastback???

01-31-2007, 08:50 PM	#27
Markcore What yo name is??!! Join Date: Aug 2006 Location: Dallas, TX Posts: 2,223	Dropping the car off tomorrow to get the gears put in!!!

02-08-2007, 12:44 PM	#40
Markcore What yo name is??!! Join Date: Aug 2006 Location: Dallas, TX Posts: 2,223	14lbs of boost.... dude I'll hit 12's on ZEROlbs of boost!!!! lol! I met this dude on the Buckeyestangs site. He said when the track opens in Ohio I can run his drag radials a few times. Some pretty cool dudes over there. I'll tell you what... when i come down to VA this summer we can use your truck to haul my car to the track. How about that? Hell buddy I'll even let you run it a few times. No sense in just one of us getting to go fast all day. __________________ 2007 F250 CCSB - 2007 F250 PowerStroke 20 degree cold start walk around *HD - YouTube

02-08-2007, 02:24 PM	#42
Markcore What yo name is??!! Join Date: Aug 2006 Location: Dallas, TX Posts: 2,223	You just stick to the quads and leave the Drag racing up to me buddy! __________________ 2007 F250 CCSB - 2007 F250 PowerStroke 20 degree cold start walk around *HD - YouTube

02-17-2007, 12:35 AM	#45
Markcore What yo name is??!! Join Date: Aug 2006 Location: Dallas, TX Posts: 2,223	Dude I'm thinking about buying a yamaha chromed out 1100!!! I dont think they sell them at the shop here. Might be able to find one on Ebay or somethin'. THEN, we'll see whats up!!! Vrooooooooooooooooooom __________________ 2007 F250 CCSB - 2007 F250 PowerStroke 20 degree cold start walk around *HD - YouTube

03-04-2007, 07:09 PM	#47
ExtraDuty77 Registered User Join Date: Jul 2006 Location: Tipton, Mi Posts: 1,434	Well sold the Busa and soon as the check clears, iam hoping to get it to fastlane before i deploy on the 14th of march. Need to get a foundation built for the 2.6 kenne bell. to bad i won't see it untill nov. __________________ NO MUSTANG FUCK MMR 2015 RT Challenger 12 F350 Lariat FX4 13 Fusion 11 F150 FX4 SOLD 12 Escape Sold 06 Mustang GT (R.I.P) 06 Expedition Sold 94 GT 3 valve (SOLD)

03-08-2007, 12:54 PM	#48
ExtraDuty77 Registered User Join Date: Jul 2006 Location: Tipton, Mi Posts: 1,434	New parts Well iam sad to say iam not going to be able to get my car to Fastlane. Iam going with someone closer to the house so the wife can deal with it while iam deployed. 4.6L 3-Valve Stroker Rotating Assembly Features: Custom Livernois Forged Steel Stroker Crankshaft Livernois Exclusive MAHLE 3-Valve Forged Pistons MAHLE Rings, Locks, and Wrist Pins Livernois Exclusive Manley H-Beam Rods Federal Mogul Race Bearings * All Rotating Assemblies are Balanced and include MAHLE Pistons and Manley H-Beam Rods engineered EXCLUSIVELY for Livernois Motorsports These are the part I have so far along with a center force DF Clutch and Alum flywheeland shorty headers. can't wait until nov so i can see it. __________________ NO MUSTANG FUCK MMR 2015 RT Challenger 12 F350 Lariat FX4 13 Fusion 11 F150 FX4 SOLD 12 Escape Sold 06 Mustang GT (R.I.P) 06 Expedition Sold 94 GT 3 valve (SOLD)

03-08-2007, 06:35 PM	#49
Alansvt Registered User Join Date: Jul 2006 Location: Sanford/Fayetteville/Ft. Bragg Posts: 1,976	lol I hope you know what your doing ^^ LOL __________________ 2002 F150 Screw DD 2001 Lightning Sold 2010 TT Gt500 Sold Next project 67-68 Fastback???

03-09-2007, 10:46 PM	#50
Markcore What yo name is??!! Join Date: Aug 2006 Location: Dallas, TX Posts: 2,223	Hey man do you still have those SLP Loud Mouth Mufflers?? __________________ 2007 F250 CCSB - 2007 F250 PowerStroke 20 degree cold start walk around *HD - YouTube

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode