View Full Version : Turbo-Guard, for those tight places!

01-14-2013, 08:41 PM
We are proud to announce we are now retailers for Turbo-Guard filters. Many times during builds we run into mounting turbos in tight places where cone filters just wont fit. While it is intended for race use only to keep debris out of the turbo it is still extremely free flowing. If you choose to run these on the street please note they were intended for race use only!

Although several customers have used them on street cars with great success!



These come in a variety of sizes from 2.5" all the way to 6" starting at just $20 shipped!!!

Please note a lip of 1.5" is recommended for installation.

01-14-2013, 09:41 PM

D.O.C. Rockwell
01-14-2013, 10:10 PM
Nice! Ya'll without filters need to jump on this!

--The D.O.C.

01-15-2013, 07:18 AM
pm sent

01-15-2013, 08:23 AM
All PM's replied!

08-20-2013, 04:01 AM
You should do a back to back on your dyno with and without to see what kind of loss the street guys are looking at.

08-20-2013, 09:33 AM
We have, each set up yields different results... You can pretty much take it as running without a filter, itís just there to prevent debris from being sucked in and ruining an impeller :ohnoes:

Cheap insurance, $20 to save $2000 and up......