Hardened Pushrods?

[TSDuke]

Dusty, since you hooked me up with the deal on the wideband, I thought I'd run this by you. I've determined that I used the wrong length pushrod with my setup, which could be causing some of the excessive valvetrain noise that I'm experiencing. I need a set (16) of 7.425" length 5/16" diameter, hardened pushrods. I know Comp Cams has them, part # 7796-16. Let me know what you can do.

Thanks,
Tucker

[screamin' 85 z]

Wow Tucker.... For some reason this is the FIRST time I've seen this post. Sorry I missed it. (Not that it matters at this point :) )